A belt exclusively designed for use in grain elevators and conveyor systems. Excels in standard-setting user benefits, such as superior abuse resistance, reduced belt elongation, maximum resistance to oil swelling, and exceptional electrical resistance.
Carcass:
Stands up to the most abusive operating conditions in grain storage facilities. Whether it's punching holes for installing buckets or hammering rivets into a mechanical fastener. The strong, synthetic fabric carcass provides excellent bolt holding and superior fastener retention.
Fabric:
Low stretch, high strength synthetic fabric provides dimensional stability to the fabric and enhances the adhesion values between the fabric and rubber.
Covers:
The top and bottom covers belts are designed to provide the maximum degree of oil resistance to withstand the potentially damaging effects of crushed soybeans, whole soybeans, oily grains and mineral oil dust suppressant sprays. Reduces any chance for rubber swell or softening resulting in excellent adhesion and splice life.
Carcass constructions are designed with a 10:1 safety factor.
All belts are static conductive, offering an exceptionally low electrical resistance below the OSHA and ISO standard of 300 megohms. Additionally, each roll of our belt is tested prior to shipment to ensure that the belt meets or betters the USMSHA test 30 CFR 18.65 requirement for flame resistance.
Belts are designed with high strength nylon fill cords which provide excellent resistance to bolt pull-out. This enables carcass to securely hold the buckets in elevator leg service.
The oil resistant skim coats, provide excellent adhesion values.
Static conductive
Flame resistant
Superior oil resistance
Improved adhesion
Outstanding flexibility
Unmatched strength
We strongly recommend, for an optimal visualization of the details of this table, to view it on a larger screen.
Show TIPICAL CONVEYOR BELT DATA table on this screen
Hide TIPICAL CONVEYOR BELT DATA table
Carcass
400
630
800
1250
1600
Number of Plies
3
3
4
4
5
Fabric Type
EP
EP
EP
EP
EP
Vulcanized / Machanical Splice Rating (KN/M)
38
58
77
120
154
Elevator Rating (KN/M)
32
49
70
100
128
Maximum Bucket Projection (mm)
150
200
250
300
300
Aprox. Carcass Gauge (mm)
3.0
4.0
5.5
8.5
11.0
Aprox. Carcass Weight (Kg/sq.m)
4.4
5.6
7.7
11.9
15.3
Aprox. Cover Weight Per 1mm (Kg/sq.m)
1.3
1.3
1.3
1.3
1.3
We strongly recommend, for an optimal visualization of the details of this table, to view it on a larger screen.
Show TROUGHABILITY (MINIMUM BELT WIDTH) (mm) table on this screen
Hide TROUGHABILITY (MINIMUM BELT WIDTH) (mm) table
Carcass
400
630
800
1250
1600
Number of Plies
3
3
4
4
5
Idlers
-
-
-
-
-
20 deg
500
500
600
600
1050
35 deg
500
600
750
750
1050
45 deg
500
750
900
900
1200
We strongly recommend, for an optimal visualization of the details of this table, to view it on a larger screen.
Show MINIMUM PULLEY DIAMETERS (MM) table on this screen
DOWNLOAD PDF